Information for zc702

This page provides detailed information about the xilinx.ovpworld.org zc702 Virtual Platform / Virtual Prototype.

Licensing
Open Source Apache 2.0

Description
This module implements the Zynq zc702 Evaluation Board. This module provides the board level definition and the instantiation of a Zynq and memory.

Limitations
Currently this module is not used. It instances the Zynq module only.

Reference
ZC702 Board user Guide UG850 (v1.5) September 4,2015 (ug850-zc702-eval-bd.pdf) and Zynq-7000 AP SoC Technical Reference Manual UG585 (v1.10) February 23, 2015 (https://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf)

Description
The configuration file for LED and Switch usage

Location
The zc702 virtual platform is located in an Imperas/OVP installation at the VLNV: xilinx.ovpworld.org / module / zc702 / 1.0.

Platform Summary

Table 1: Components in platform

Platform Simulation Attributes

Table 2: Platform Simulation Attributes

---

Sub-Module [xilinx.ovpworld.org/module/Zynq/1.0] instance: Zynq

Table 3: Sub-Module Instance 'Zynq' Connections

---

Peripheral Instances

---

Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus1

Description
Texas Instruments UCD9248 peripheral

Licensing
Open Source Apache 2.0

Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.

Reference
Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf

There are no configuration options set for this peripheral instance.

---

Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus2

Description
Texas Instruments UCD9248 peripheral

Licensing
Open Source Apache 2.0

Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.

Reference
Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf

There are no configuration options set for this peripheral instance.

---

Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus3

Description
Texas Instruments UCD9248 peripheral

Licensing
Open Source Apache 2.0

Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.

Reference
Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf

There are no configuration options set for this peripheral instance.

---

Other Sites/Pages with similar information

Information on the zc702 Virtual Platform can also be found on other web sites :
www.ovpworld.org has the library pages http://www.ovpworld.org/library/wikka.php?wakka=CategoryPlatform
www.imperas.com has more information on the model library

A couple of documents (from other related sites that might be of interest)
http://www.ovpworld.org: VMI Operating System support (VMI OS) API Reference Guide
http://www.ovpworld.org: Control File User Guide

Two Videos on these models (from other sites)
http://www.ovpworld.org: ARC Demo Video Presentation
http://www.ovpworld.org: riscvOVPsim. A complete RISC-V ISS for bare-metal software development and Specification Compliance Test Development

---

Currently available Imperas / OVP Virtual Platforms / Virtual Prototypes for Embedded Software Development and Test Automation.